show chassis device-mode
Syntax
Release Information
Command introduced in Junos OS Release 11.2 for the QFX Series.
Description
Display information about the operating mode of the device. For example, QFX3500 devices operate either as a single switch in standalone mode or as a QFabric system Node device in node-device mode.
 | Note: Issue the show chassis device-mode command only when your management station is connected directly to the device over a console port connection. |
Options
There are no options for this command.
Required Privilege Level
admin
List of Sample Output
show chassis device-mode (Interconnect Device Mode)show chassis device-mode (Interconnect Device Mode, but Node Device-Ready)
show chassis device-mode (Interconnect Device Mode, but Standalone-Ready)
show chassis device-mode (Node Device Mode)
show chassis device-mode (Node Device Mode, but Interconnect Device-Ready)
show chassis device-mode (Node Device Mode, but Standalone-Ready)
show chassis device-mode (Standalone Mode)
show chassis device-mode (Standalone Mode, but Interconnect Device-Ready)
show chassis device-mode (Standalone Mode, but Node Device-Ready)
Output Fields
Table 1 lists the output fields for the show chassis device-mode command. Output fields are listed in the approximate order in which they appear.
Table 1: show chassis device-mode Output Fields
Field Name | Field Description |
|---|---|
Current device-mode | Existing operational mode for the device. The device can be in Interconnect device mode, Node device mode, or standalone mode. |
Future device-mode after reboot | Future operational mode for the device after you reboot it. The device can be set to enter Interconnect device mode, Node device mode, or standalone mode. Note: To set the future mode of the device, issue the request chassis device-mode command. |
Sample Output
show chassis device-mode (Interconnect Device Mode)
user@switch> show chassis device-modeCurrent device-mode : Interconnect-device Future device-mode after reboot : Interconnect-device
show chassis device-mode (Interconnect Device Mode, but Node Device-Ready)
user@switch> show chassis device-modeCurrent device-mode : Interconnect-device Future device-mode after reboot : Node-device
show chassis device-mode (Interconnect Device Mode, but Standalone-Ready)
user@switch> show chassis device-modeCurrent device-mode : Interconnect-device Future device-mode after reboot : Standalone
show chassis device-mode (Node Device Mode)
user@switch> show chassis device-modeCurrent device-mode : Node-device Future device-mode after reboot : Node-device
show chassis device-mode (Node Device Mode, but Interconnect Device-Ready)
user@switch> show chassis device-modeCurrent device-mode : Node-device Future device-mode after reboot : Interconnect-device
show chassis device-mode (Node Device Mode, but Standalone-Ready)
user@switch> show chassis device-modeCurrent device-mode : Node-device Future device-mode after reboot : Standalone
show chassis device-mode (Standalone Mode)
user@switch> show chassis device-modeCurrent device-mode : Standalone Future device-mode after reboot : Standalone
show chassis device-mode (Standalone Mode, but Interconnect Device-Ready)
user@switch> show chassis device-modeCurrent device-mode : Standalone Future device-mode after reboot : Interconnect-device
show chassis device-mode (Standalone Mode, but Node Device-Ready)
user@switch> show chassis device-modeCurrent device-mode : Standalone Future device-mode after reboot : Node-device
