show analyzer
Syntax
Release Information
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Display information about analyzers configured for port mirroring.
Options
analyzer-name | — | (Optional) Displays the status of a specific analyzer on the switch. |
Required Privilege Level
view
List of Sample Output
show analyzerOutput Fields
Table 1 lists the output fields for the command-name command. Output fields are listed in the approximate order in which they appear.
Table 1: show analyzer Output Fields
Field Name | Field Description |
|---|---|
Analyzer name | Displays the name of the analyzer. |
Output interface | Specifies a local interface to which mirrored packets are sent. An analyzer can have output to either an interface or a VLAN, not both. |
Output VLAN | Specifies a VLAN to which mirrored packets are sent. An analyzer can have output to either an interface or a VLAN, not both. |
Mirror ratio | Displays the ratio of packets to be mirrored, between 1 and 2047 where 1 sends copies of all packets and 2047 sends copies of 1 out of every 2047 packets. |
Loss priority | Displays the loss priority of mirrored packets. By default, loss priority is set to low, with mirrored traffic dropped in preference for regular traffic when capacity is exceeded. For analyzers with output to a VLAN, set the loss priority to high. |
Egress monitored interfaces | Displays interfaces for which traffic exiting the interfaces is mirrored. |
Ingress monitored interfaces | Displays interfaces for which traffic entering the interfaces is mirrored. |
Ingress monitored VLANs | Displays VLANs for which traffic entering the VLAN is mirrored. |
Sample Output
show analyzer
user@host> show analyzerAnalyzer name : employee-monitor Output interface : ge-0/0/10.0 Output VLAN : remote-analyzer Mirror ratio : 1 Loss priority : High Egress monitored interfaces : ge-0/0/3.0 Ingress monitored interfaces : ge-0/0/0.0 Ingress monitored interfaces : ge-0/0/1.0
