DISABLE DTCP
Syntax
Release Information
Command introduced in Junos OS Release 12.3.
Description
Specify the DTCP ENABLE message to remove a drop policy that exists because of a prior DTCP ADD or DTCP ENABLE command
The DTCP DISABLE message can only be issued on a Criteria-ID that was returned in a response to a previous DTCP ADD. The policy applies to any new subscribers that match the trigger corresponding to the Criteria-ID. Any existing mirroring remains in place, the policy is not be applied to them.
Options
Csource-ID: user-name | — | Username on the router. This username must be configured as a DTCP user on the router using the set system login class or set system login user statements. |
Criteria-ID: variable | — | Identifies the subscriber on which the policy update occurs. |
Flags: flag | — | STATIC is the only flag supported. |
X-Drop-Policy: variable | — | Name of the policy that determines which mirrored packets are no longer sent to the mediation device. |
Required Privilege Level
Not applicable.
List of Sample Output
Sample Output
DISABLE DTCP/0.7 Csource-ID: ft-user1 Criteria-ID: 1 X-Drop: T1 Flags: STATIC Seq: 1 Authentication-Info: c16d2d9d1679facf0c4a66683af6114d341e4033 DTCP/0.7 200 OK SEQ: 7 CRITERIA-ID: 2 TIMESTAMP: 2011-02-13 15:56:49.609
