Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- MX Series
- MX Series Router as a Layer 2 DHCP Relay Agent
- Example: Configuring DHCP Relay in a VPLS Routing Instance Environment
- Additional Information
- DHCP Relay Agent
Example: Configuring DHCP Relay in a Bridge Domain VLAN Environment
The following example configures DHCP relay in a VPLS environment to trust only the MAC addresses learned on the listed interfaces.
 | Note: This is not a complete router configuration. |
[edit]
routing-instances {classic-vpls {instance-type vpls;interface ge-1/1/1.0;interface ge-1/1/2.0;interface ge-1/1/3.0;interface ge-1/1/4.0;interface ge-1/1/5.0;vlan-id 20;forwarding-options {dhcp-relay { # Here is where DHCP is configured.group vlan-20–bridge {interface ge-1/1/1.0;interface ge-1/1/2.0;interface ge-1/1/3.0;interface ge-1/1/4.0;interface ge-1/1/5.0;}}}protocol vpls {site-id 567;# Other VPLS configuration statements...}}}
Only MAC addresses learned on the five listed Gigabit Ethernet interfaces will be trusted for DHCP relay purposes.
For more information on configuring DHCP, see the Junos OS Subscriber Management, Release 13.1.
Related Documentation
- MX Series
- MX Series Router as a Layer 2 DHCP Relay Agent
- Example: Configuring DHCP Relay in a VPLS Routing Instance Environment
- Additional Information
- DHCP Relay Agent
