Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- MX Series
- Configuring a Subscriber Interface with a Static VLAN Interface
- For more information about demux interfaces, see Subscriber Interfaces and Demultiplexing Overview
Static Subscriber Interfaces and VLAN Overview
This topic describes the topology for configuring subscriber interfaces over static VLAN interfaces in the current release.
In a dynamic profile, you can configure VLAN subscriber interfaces over the following statically created logical interface types:
- GE—Gigabit Ethernet
- XE—10-Gigabit Ethernet
- AE—Aggregated Ethernet
We recommend that you configure each subscriber on a statically created VLAN.
Figure 1 shows an example of subscriber interfaces on an individual VLAN.
Figure 1: VLAN Subscriber Interfaces
You can further separate VLANs on subscriber interfaces by configuring a VLAN interface as the underlying interface for a set of IP demux interfaces.
Related Documentation
- MX Series
- Configuring a Subscriber Interface with a Static VLAN Interface
- For more information about demux interfaces, see Subscriber Interfaces and Demultiplexing Overview
