Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- M Series
- Configuring a PPPoE Dynamic Profile for Use with NDRA in a Dual-Stack Network
- Overview of Configuration Tasks for IPv4 and IPv6 Dual-Stack in Subscriber Access Networks
- MX Series
- Configuring a PPPoE Dynamic Profile for Use with NDRA in a Dual-Stack Network
- Overview of Configuration Tasks for IPv4 and IPv6 Dual-Stack in Subscriber Access Networks
Best Practice: IPv6 Addressing for Logical Interfaces in PPPoE Dynamic Profiles with NDRA
When you use NDRA, always set the IPv6 internet address in dynamic profiles to the $junos-ipv6-address predefined variable. This variable is replaced with the IPv6 address of the interface used for router advertisements.
[edit dynamic-profiles]
dyn-v4v6-ndra {interfaces {pp0 {unit "$junos-interface-unit" {family inet6 {address "$junos-ipv6-address ";}}}}}
Related Documentation
- M Series
- Configuring a PPPoE Dynamic Profile for Use with NDRA in a Dual-Stack Network
- Overview of Configuration Tasks for IPv4 and IPv6 Dual-Stack in Subscriber Access Networks
- MX Series
- Configuring a PPPoE Dynamic Profile for Use with NDRA in a Dual-Stack Network
- Overview of Configuration Tasks for IPv4 and IPv6 Dual-Stack in Subscriber Access Networks
