IEEE 802.3ad, Aggregation of Multiple Link Segments

The following tables and objects are supported:

• dot3adAggPortTable, dot3adAggPortListTable, dot3adAggTable, and dot3adAggPortStatsTable
• dot3adAggPortDebugTable (only dot3adAggPortDebugRxState, dot3adAggPortDebugMuxState, dot3adAggPortDebugActorSyncTransitionCount, dot3adAggPortDebugPartnerSyncTransitionCount, dot3adAggPortDebugActorChangeCount, and dot3adAggPortDebugPartnerChangeCount)
• dot3adTablesLastChanged

RFC 1157, A Simple Network Management Protocol (SNMP)

—

RFC 1213, Management Information Base for Network Management of TCP/IP-Based Internets: MIB-II

The following areas are supported:

• MIB II and its SNMP version 2 derivatives, including:
  • Statistics counters
  • IP, except for ipRouteTable, which has been replaced by ipCidrRouteTable (RFC 2096, IP Forwarding Table MIB)
  • ipAddrTable
  • SNMP management
  • Interface management
• SNMPv1 Get, GetNext requests, and SNMPv2 GetBulk request
• Junos OS-specific secured access list
• Master configuration keywords
• Reconfigurations upon SIGHUP

RFC 1286, Definitions of Managed Objects for Bridges

—

RFC 1850, OSPF Version 2 Management Information Base

The following table, objects, and traps are not supported:

• Host Table
• ospfOriginateNewLsas and ospfRxNewLsas objects
• ospfOriginateLSA, ospfLsdbOverflow, and ospfLsdbApproachingOverflow traps

RFC 1905, Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)

—

RFC 2011, SNMPv2 Management Information Base for the Internet Protocol Using SMIv2

—

RFC 2013, SNMPv2 Management Information Base for the User Datagram Protocol Using SMIv2

—

RFC 2287, Definitions of System-Level Managed Objects for Applications

The following objects are supported:

• sysApplInstallPkgTable
• sysApplInstallElmtTable
• sysApplElmtRunTable
• sysApplMapTable

RFC 2571, An Architecture for Describing SNMP Management Frameworks (read-only access)

Note: RFC 2571 has been replaced by RFC 3411. However, Junos OS supports both RFC 2571 and RFC 3411.

RFC 2576, Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework

Note: RFC 2576 has been replaced by RFC 3584. However, Junos OS supports both RFC 2576 and RFC 3584.

RFC 2579, Textual Conventions for SMIv2

—

RFC 2665, Definitions of Managed Objects for the Ethernet-like Interface Types

—

RFC 2790, Host Resources MIB

Support is limited to the following objects:

• Only hrStorageTable. The file systems /, /config, /var, and /tmp always return the same index number. When SNMP restarts, the index numbers for the remaining file systems might change.
• Only the objects of the hrSystem and hrSWInstalled groups.

RFC 2863, The Interfaces Group MIB

Note: RFC 2233 has been replaced by RFC 2863. However, Junos OS supports both RFC 2233 and RFC 2863.

RFC 2933, Internet Group Management Protocol (IGMP) MIB

—

RFC 3410, Introduction and Applicability Statements for Internet Standard Management Framework

—

RFC 3412, Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)

Note: RFC 3412 replaces RFC 2572. However, Junos OS supports both RFC 3412 and RFC 2572.

RFC 3414, User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)

—

RFC 3416, Version 2 of the Protocol Operations for the Simple Network Management Protocol (SNMP)

Note: RFC 3416 replaces RFC 1905, which was supported in earlier versions of Junos OS.

RFC 3418, Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)

Note: RFC 3418 replaces RFC 1907, which was supported in earlier versions of Junos OS.

RFC 3826, The Advanced Encryption Standard (AES) Cipher Algorithm in the SNMP User-based Security Model

—

RFC 4293, Management Information Base for the Internet Protocol (IP)

Supports the ipAddrTable table only.

RFC 4363b, Q-Bridge VLAN MIB

Note: On QFX3500 and QFX3600 switches, the dot1dTpFdbTable table (RFC 4188, Definitions of Managed Objects for Bridges) is populated only with MAC addresses learned on the default VLAN. To see the MAC addresses of all VLANs, specify the dot1qTpFdbTable table (in this MIB) when you issue the show snmp mib walk command.

Internet Assigned Numbers Authority, IANAiftype Textual Convention MIB (referenced by RFC 2233)

See http://www.iana.org/assignments/ianaiftype-mib .

Internet draft draft-ietf-idmr-igmp-mib-13.txt, Internet Group Management Protocol (IGMP) MIB

—

Analyzer MIB (mib-jnx-analyzer)

Contains analyzer and remote analyzer data related to port mirroring.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/ reference/mibs/mib-jnx-analyzer.txt .

For more information, see Analyzer MIB.

Chassis Definitions for Router Model MIB (mib-jnx-chas-defines)

Contains the object identifiers (OIDs) that are used by the Chassis MIB to identify routing and switching platforms and chassis components. The Chassis MIB provides information that changes often, whereas the Chassis Definitions for Router Model MIB provides information that changes less often.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/ reference/mibs/mib-jnx-chas-defines.txt .

For more information, see Chassis MIBs.

Configuration Management MIB (mib-jnx-cfgmgmt)

Provides notification for configuration changes and rescue configuration changes in the form of SNMP traps. Each trap contains the time at which the configuration change was committed, the name of the user who made the change, and the method by which the change was made.

A history of the last 32 configuration changes is kept in jnxCmChgEventTable.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/ reference/mibs/mib-jnx-cfgmgmt.txt .

For more information, see Configuration Management MIB.

Event MIB (mib-jnx-event)

Defines a generic trap that can be generated using an operations script or event policy. This MIB provides the ability to specify a system log string and raise a trap if that system log string is found.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/reference/ mibs/mib-jnx-event.txt .

For more information, see Event MIB.

Host Resources MIB (mib-jnx-hostresources)

Extends the hrStorageTable object, providing a measure of the usage of each file system on the switch as a percentage. Previously, the objects in the hrStorageTable measured the usage in allocation units—hrStorageUsed and hrStorageAllocationUnits—only. Using the percentage measurement, you can more easily monitor and apply thresholds on usage.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/reference/ mibs/mib-jnx-hostresources.txt .

For more information, see Host Resources MIB.

Ping MIB (mib-jnx-ping)

Extends the standard Ping MIB control table (RFC 2925). Items in this MIB are created when entries are created in pingCtlTable of the Ping MIB. Each item is indexed exactly as it is in the Ping MIB.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/reference/ mibs/mib-jnx-ping.txt .

For more information, see PING MIB.

Structure of Management Information MIB (mib-jnx-smi)

Explains how the Juniper Networks enterprise-specific MIBs are structured.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/reference/ mibs/mib-jnx-smi.txt .

For more information, see Structure of Management Information MIB.

Utility MIB (mib-jnx-util)

Provides you with SNMP MIB container objects of the following types: 32-bit counters, 64-bit counters, signed integers, unsigned integers, and octet strings. You can use these objects to store data that can be retrieved using other SNMP operations.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/reference/ mibs/mib-jnx-util.txt .

For more information, see Utility MIB and Using the Enterprise-Specific Utility MIB to Enhance SNMP Coverage.

RFC 1157, A Simple Network Management Protocol (SNMP)

—

RFC 1213, Management Information Base for Network Management of TCP/IP-Based Internets: MIB-II

The following areas are supported:

• MIB II and its SNMP version 2 derivatives, including:
  • Statistics counters
  • IP, except for ipRouteTable, which has been replaced by ipCidrRouteTable (RFC 2096, IP Forwarding Table MIB)
  • ipAddrTable
  • SNMP management
  • Interface management
• SNMPv1 Get, GetNext requests, and version 2 GetBulk request
• Junos OS-specific secured access list
• Master configuration keywords
• Reconfigurations upon SIGHUP

RFC 1286, Definitions of Managed Objects for Bridges

—

RFC 1905, Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)

—

RFC 2011, SNMPv2 Management Information Base for the Internet Protocol Using SMIv2

Note: On the QFabric system, for the SNMP mibwalk request to work, you must configure the IP address of at least one interface besides the management Ethernet interfaces (me0 and me1) in the Director group.

RFC 2013, SNMPv2 Management Information Base for the User Datagram Protocol Using SMIv2

—

RFC 2571, An Architecture for Describing SNMP Management Frameworks (read-only access)

Note: RFC 2571 has been replaced by RFC 3411. However, Junos OS supports both RFC 2571 and RFC 3411.

RFC 2576, Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework

Note: RFC 2576 has been replaced by RFC 3584. However, Junos OS supports both RFC 2576 and RFC 3584.

RFC 2579, Textual Conventions for SMIv2

—

RFC 2665, Definitions of Managed Objects for the Ethernet-like Interface Types

The QFabric system supports the following tables only:

• dot3StatsTable—There is one row with statistics for each Ethernet-like interface in the QFabric system. The dot3StatsIndex is an interface index that is unique across the system.
• dot3ControlTable—There is one row in this table for each Ethernet-like interface in the QFabric system that implements the MAC control sublayer. OIDs supported are dot3ControlFunctionsSupported and dot3ControlInUnknownOpcode.
• dot3PauseTable—There is one row in this table for each Ethernet-like interface in the QFabric system that supports the MAC control PAUSE function. OIDs supported are dot3PauseAdminMode, dot3PauseOperMode, dot3InPauseFrames, and dot3OutPauseFrames.

Note: Scalar variables are not supported on the QFabric system.

RFC 2933, Internet Group Management Protocol (IGMP) MIB

—

RFC 3411, An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks

Note: RFC 3411 replaces RFC 2571. However, Junos OS supports both RFC 3411 and RFC 2571.

RFC 3416, Version 2 of the Protocol Operations for the Simple Network Management Protocol (SNMP)

Note: RFC 3416 replaces RFC 1905, which was supported in earlier versions of Junos OS.

RFC 3418, Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)

Note: RFC 3418 replaces RFC 1907, which was supported in earlier versions of Junos OS.

RFC 4188, Definitions of Managed Objects for Bridges

The QFabric system support is limited to the following objects:

• Under the dot1dBase OID, the dot1dBasePortTable table supports only the first two columns in the table: dot1dBasePort and dot1dBasePortIfIndex.
• The system does not implement the optional traps supporting dot1dNotifications (dot1dBridge 0).
• Under the dot1dStp OID, supports only the dot1dStpPortTable table. Does not support the scalar variables under dot1dStp.
• The system does not support scalar variables under dot1dTp, but under that, the dot1dTpFdbTable table is supported (dot1dBridge 4).
• For OIDS with tables support only, scalar values that are returned by the SNMP agent may not be meaningful and are therefore not recommended for use.

RFC 4363b, Q-Bridge VLAN MIB

The QFabric system supports the following tables only:

• dot1qTpFdbTable
• dot1qVlanStaticTable
• dot1qPortVlanTable
• dot1qFdbTable

Chassis MIB (mib-jnx-chassis)

Note: The Chassis MIB has been deprecated for the QFabric system. We recommend that you use the Fabric Chassis MIB (mib-jnx-fabric-chassis) for information about the QFabric system.

Configuration Management MIB (mib-jnx-cfgmgmt)

Provides notification for configuration changes and rescue configuration changes in the form of SNMP traps. Each trap contains the time at which the configuration change was committed, the name of the user who made the change, and the method by which the change was made.

A history of the last 32 configuration changes is kept in jnxCmChgEventTable.

Note: On the QFabric system, these conditions apply:

• All scalar variables under the jnxCmCfgChg table are supported.
• Supported scalar OIDs are jnxCmCfgChgLatestIndex, jnxCmCfgChgLatestTime, jnxCmCfgChgLatestDate, jnxCmCfgChgLatestSource, jnxCmCfgChgLatestUser, and jnxCmCfgChgMaxEventEntries.
• Scalar variables under the jnxCmRescueChg table are not supported.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/ reference/mibs/mib-jnx-cfgmgmt.txt .

For more information, see Configuration Management MIB.

Host Resources MIB (mib-jnx-hostresources)

Extends the hrStorageTable object, providing a measure of the usage of each file system on the switch as a percentage. Previously, the objects in the hrStorageTable measured the usage in allocation units—hrStorageUsed and hrStorageAllocationUnits—only. Using the percentage measurement, you can more easily monitor and apply thresholds on usage.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/reference/ mibs/mib-jnx-hostresources.txt .

For more information, see Host Resources MIB.

Power Supply Unit MIB (mib-jnx-power-supply-unit)

Provides support for environmental monitoring of the power supply unit for the Interconnect device of the QFabric system.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/reference/ mibs/mib-jnx-power-supply-unit.txt .

For more information, see Power Supply Unit MIB.

Note: On the QFabric system, scalar variables for the jnxPsuObjects 1 object ID in the jnxPsuScalars table are not supported.

Utility MIB (mib-jnx-util)

Provides you with SNMP MIB container objects of the following types: 32-bit counters, 64-bit counters, signed integers, unsigned integers, and octet strings. You can use these objects to store data that can be retrieved using other SNMP operations.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos13.1/topics/reference/ mibs/mib-jnx-util.txt .

For more information, see Utility MIB and Using the Enterprise-Specific Utility MIB to Enhance SNMP Coverage.