Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- Monitoring Interface Status and Traffic
- Configuring Gigabit Ethernet Interfaces (CLI Procedure)
- Configuring Gigabit Ethernet Interfaces (J-Web Procedure)
- Installing an Uplink Module in an EX4200 Switch
- Removing a Transceiver from an EX Series Switch
- Uplink Modules in EX4200 Switches
- Understanding EX4200, EX4500, and EX4550 Virtual Chassis Hardware Configurations
Troubleshooting Virtual Chassis Port Connectivity on an EX4200 Switch
This topic provides troubleshooting information for specific problems related to uplink module ports on EX4200 switches.
Virtual Chassis port (VCP) connection does not work
Problem
The Virtual Chassis port (VCP) connection configured in an EX4200 switch does not work.
A port of the uplink module is set as a VCP.
Cause
The uplink module installed in the switch was replaced.
Solution
Set a port in the uplink module as a VCP. See Setting an Uplink Port on an EX2200, EX3300, or EX4200 Switch as a Virtual Chassis Port (CLI Procedure).
Related Documentation
- Monitoring Interface Status and Traffic
- Configuring Gigabit Ethernet Interfaces (CLI Procedure)
- Configuring Gigabit Ethernet Interfaces (J-Web Procedure)
- Installing an Uplink Module in an EX4200 Switch
- Removing a Transceiver from an EX Series Switch
- Uplink Modules in EX4200 Switches
- Understanding EX4200, EX4500, and EX4550 Virtual Chassis Hardware Configurations
