Managing System Processes in a Routing Matrix with a TX Matrix Plus Router
Some system processes in a routing matrix with a TX Matrix Plus run on the TX Matrix Plus router and some run on the T1600 routers. For example, the routing protocol process (rpd) runs exclusively on the TX Matrix Plus router. To restart the routing protocol process for the entire routing matrix, issue the restart routing command on the TX Matrix Plus router:
user@host> restart routing ? Possible completions: <[Enter]> Execute this command gracefully Gracefully restart the process immediately Immediately restart (SIGKILL) the process logical-system Name of logical system soft Soft reset (SIGHUP) the process | Pipe through a command
Other processes run on both the TX Matrix Plus router and the T1600 routers. To restart the chassis process that manages PICs, FPCs, and other hardware components, issue the restart chassis-control command on the TX Matrix Plus router and select the all, all-lcc, or lcc lcc-number option:
user@host> restart chassis-control ?Possible completions: <[Enter]> Execute this command all-chassis Restart software process on all chassis all-lcc Restart software process on all LCC chassis gracefully Gracefully restart the process immediately Immediately restart (SIGKILL) the process lcc Restart software process on specific LCC (0..3) sfc Restart software process on SFC (0..0) soft Soft reset (SIGHUP) the process | Pipe through a command
To restart the SNMP process, issue the restart snmp command on the TX Matrix Plus router and select the all, all-lcc, or lcc lcc-number option:
user@host> restart snmp ? Possible completions: <[Enter]> Execute this command all-chassis Restart software process on all chassis all-lcc Restart software process on all LCC chassis gracefully Gracefully restart the process immediately Immediately restart (SIGKILL) the process lcc Restart software process on specific LCC (0..3) sfc Restart software process on SFC (0..0) soft Soft reset (SIGHUP) the process | Pipe through a command
