Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Displaying Chassis Physical Locations for a Routing Matrix with a TX Matrix Plus Router
In a routing matrix with a TX Matrix Plus router, you can use the show chassis location operational command to display the physical locations of hardware components in the routing matrix:
- To display the router physical location descriptions defined
in the location configuration statement at the [edit system] hierarchy
level, issue the show chassis location operational command.
To limit the command output to the location configuration
settings for the TX Matrix Plus router (SFC) only, include the sfc 0 option. To limit the command output
to the location configuration settings for a particular T1600
router (LCC), include the lcc lcc-number option. For example:
user@host> show chassis location sfc 0sfc0-re0: -------------------------------------------------------------------------- country-code: US postal-code: 94404 Building: Building 2, Floor: 2
- To display the numbers of the connected Flexible PIC Concentrators
(FPCs) in both routing matrix “global numbering” mode
(0 through 31, as used to specify an interface name
in a routing matrix) and associated “local numbering”
mode (LCC number and FPC slot number), include the fpc option. Example:
user@host> show chassis location fpcGlobal FPC LCC Local FPC 1 0 1 2 0 2 3 0 3 16 2 6 17 2 1 19 2 3 - To display the T1600 router (or line-card chassis) number
and FPC number associated with a particular interface name, include
the interface by-name interface-name option. For example:
user@host> show chassis location interface by-name ge-16/3/7.1Interface Name: ge-16/3/7.0, LCC: 2, FPC: 6
- To display the interface name associated with a particular
FPC, include the interface by-slot lcc lcc-number fpc fpc-slot-number option. For example:
user@host> show chassis location interface by-slot lcc 2 fpc 6Global FPC: 16
