Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- EX Series
- Root Protection for Spanning-Tree Instance Interfaces Overview
- BPDU Protection for Spanning-Tree Instance Interfaces Overview
- BPDU Protection on All Edge Ports of the Bridge
- MX Series
- Root Protection for Spanning-Tree Instance Interfaces Overview
- BPDU Protection for Spanning-Tree Instance Interfaces Overview
- BPDU Protection on All Edge Ports of the Bridge
Configuring BPDU Protection on All Edge Ports
On MX Series routers and EX Series switches, you can configure BPDU protection to ignore BPDU received on interfaces where none should be expected. If a BPDU is received on a blocked interface, the interface is disabled and stops forwarding frames. By default, all BPDUs are accepted and processed on all interfaces.
To configure BPDU protection for all edge ports for a particular spanning-tree protocol::
- Enable edge port blocking for a particular spanning-tree
protocol:
[edit]
user@host# set protocols (STP Type) (mstp | rstp | vstp) bpdu-block-on-edge Verify BPDU protection for edge ports.
[edit]
Related Documentation
- EX Series
- Root Protection for Spanning-Tree Instance Interfaces Overview
- BPDU Protection for Spanning-Tree Instance Interfaces Overview
- BPDU Protection on All Edge Ports of the Bridge
- MX Series
- Root Protection for Spanning-Tree Instance Interfaces Overview
- BPDU Protection for Spanning-Tree Instance Interfaces Overview
- BPDU Protection on All Edge Ports of the Bridge
