Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- M Series
- next-server
- MX Series
- next-server
- SRX Series
- next-server
- T Series
- next-server
Configuring the Next DHCP Server to Contact After a Boot Client Establishes Initial Communication
On J Series Services Routers, you can configure the next DHCP server to contact after a DHCP boot client establishes initial communication. You can use this option to specify the IP address of the DHCP server that is used as the “siaddr” in a DHCP protocol packet.
To configure the next server, include the next-server next-server statement at one of the following hierarchy levels:
- [edit system services dhcp]
- [edit system services dhcp pool pool-id]
- [edit system services dhcp static-binding mac-address]
[edit system services dhcp]next-server next-server;
[edit system services dhcp pool pool-id]next-server next-server;
[edit system services dhcp static-binging mac-address]next-server next-server;
Related Documentation
- M Series
- next-server
- MX Series
- next-server
- SRX Series
- next-server
- T Series
- next-server
