Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Disabling DCBX Application Protocol Exchange on EX Series Switches (CLI Procedure)
You can disable the Data Center Bridging Capability Exchange protocol (DCBX) Application Protocol exchange on a specific interface or on all interfaces.
To disable the DCBX application protocol exchange for any DCBX application, do the following:
 | Note: The format of the configuration statement specifies the fcoe application, however, this applies to any DCBX application (both FCoE applications and non-FCoE applications) on that interface. |
- For a specific interface:
[edit protocols]
user@switch# set dcbx interface interface-name applications fcoe no-auto-negotiation - For all interfaces:
[edit protocols]
user@switch# set dcbx interface all applications fcoe no-auto-negotiation
| Note: If you disable the DCBX application protocol exchange, the show dcbx neighbors command displays Feature: Application, Protocol-State: not-applicable. |
