Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring the Junos OS to Support ILMI for Cell Relay Encapsulation on an ATM2 IQ PIC
Integrated Local Management Interface (ILMI) is supported on AAL5 interfaces, regardless of transport mode. To enable ILMI on interfaces with cell-relay encapsulation, you must configure an ATM2 IQ PIC to use Layer 2 circuit trunk transport mode.
To configure ILMI on an interface with cell-relay encapsulation, include the following statements:
[edit chassis fpc slot-number pic pic-number]atm-l2circuit-mode trunk trunk;[edit interfaces at-fpc/pic/port]encapsulation atm-ccc-cell-relay;
atm-options {ilmi;pic-type atm2;}
unit logical-unit-number {trunk-id number;}
For an example on how to enable ILMI for cell relay,
see the Junos
OS ATM Interfaces Configuration Guide 
.
