Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    [edit interfaces interface-range] Configuration Statement Hierarchy on EX Series Switches

    This topic lists supported and unsupported configuration statements in the [edit interfaces interface-range] hierarchy level on EX Series switches.

    • Supported statements are those that you can use to configure some aspect of a software feature on the switch.
    • Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
    • Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, seeEX Series Switch Software Features Overview

    This topic lists:

    Supported Statements in the [edit interfaces interface-range] Hierarchy Level

    The following hierarchy shows the [edit interfaces interface-range] configuration statements supported on EX Series switches.

    interfaces {interface-range name {accounting-profile name; aggregated-ether-options {ethernet-switch-profile {tag-protocol-id identifier ;} (flow-control | no-flow-control);ieee-802-3az-eee;lacp {(active | passive);admin-key key;periodic interval;system-id mac-address;}(link-protection | no-link-protection);link-speed speed;(loopback | no-loopback);minimum-links number;rebalance-periodic; source-address-filter filter; source-filtering | no-source-filtering; } description text;disable;ether-options {802.3ad {aex;(backup | primary);lacp {force-up;}}(auto-negotiation | no-auto-negotiation);(flow-control | no-flow-control);link-mode mode;(loopback | no-loopback);speed (auto-negotiation | speed);}framing; (gratuitous-arp-reply | no-gratuitous-arp-reply);hold-time up milliseconds down milliseconds;member interface-name;member-range starting-interface name to ending-interface name;mtu bytes;no-gratuitous-arp-request;optics-options {alarm alarm-type;warning alarm-type;wavelength nanometers;}services-options; speed speed; traceoptions {flag flag;}(traps | no-traps);unit logical-unit-number {accept-source-mac; accounting-profile name;arp-resp; bandwidth rate; description text;disable;family ccc;family ethernet-switching {filter {input filter-name;output filter-name;}native-vlan-id vlan-id-number;port-mode (access | trunk);vlan {members [ members];}}family inet {accounting { destination-class-usage;source-class-usage;}address ipv4-address {arp ip-address (mac | multicast-mac) mac-address <publish>;broadcast address;destination-class-usage;destination-profile;master-only;preferred;primary;vrrp-group group-number {(accept-data | no-accept-data);advertise–interval seconds;authentication-key key;authentication-type authentication;fast-interval milliseconds;(preempt | no-preempt) {hold-time seconds;}priority number;track {interface interface-name {bandwidth-threshold bandwidth;priority-cost number;}priority-hold-time seconds;route ip-address/mask routing-instance instance-name priority-cost cost;}virtual-address [ addresses ];virtual-link-local-address address; vrrp-inherit-from {active-group group-number; active-interface interface-name;}}}dhcp {client-identifier (ascii client-id | hexadecimal client-id);lease-time (seconds | infinte);retransmission-attempt number;retransmission-interval sections;server-address ip-address;update-servervendor-id}filter {input filter-name;output filter-name;}ipsec-sa; mtu bytes;multicast-only; negotiate-address;next-hop-tunnel; no-neighbor-learn; no-redirects;primary;receive-option-packets;rpf-check;targeted-broadcast;}family inet6 {accounting { destination-class-usage;source-class-usage;}address address {eui-64;ndp ip-address (mac | multicast-mac) mac-address <publish>;preferred;primary;vrrp-inet6-group group-id {accept-data | no-accept-data; authentication-key key;authentication-type authentication;fast-interval milliseconds;inet6-advertise-interval milliseconds;preempt | no-preempt {hold-time seconds;}priority number;track {interface interface-name {bandwidth-threshold bandwidth priority-cost number;priority-cost number;}priority-hold-time seconds;route ( address | routing-instance routing-instance-name );}virtual-inet6-address [addresses];virtual-link-local-address ipv6–address;}vrrp-inherit-from {active-group group-name;active-interface interface-name;}}(dad-disable | no-dad-disable); filter {group group-name;input filter-name;output filter-name;}mtu bytes;no-neighbor-learn; policer {input policer-name;output policer-name;}rpf-check;}family iso {address interface-address;mtu bytes;}family mpls {mtu bytes;}interface-shared-with;interleave-fragments;inverse-arp;link-layer-overhead;minimum-links;mtu;proxy-arp (restricted | unrestricted);swap-by-poppush;(traps | no-traps);vlan-id vlan-id-number;}vlan-tagging;}

    Unsupported Statements in the [edit interfaces interface-range] Hierarchy Level

    All statements in the [edit interfaces interface-range] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exceptions:

    Table 1: Unsupported [edit interfaces interface-range] Configuration Statements for EX Series Switches

    Statement

    Hierarchy

    Note: Variables, such as interface-range, are not shown in the statements or hierarchies.

    aggregated-sonet-options and all substatements

    [edit interfaces interface-range]

    allow-any-vci

    [edit interfaces interface-range unit]

    atm-l2circuit-mode

    [edit interfaces interface-range unit]

    atm-options and all substatements

    [edit interfaces interface-range]

    cell-bundle-size

    [edit interfaces interface-range unit]

    clear-don’t-fragment-bit

    [edit interfaces interface-range unit]

    clocking

    [edit interfaces interface-range]

    compression-device

    [edit interfaces interface-range unit]

    container-options and all substatements

    [edit interfaces interface-range]

    copy-tos-to-outer-ip-header

    [edit interfaces interface-range unit]

    dce

    [edit interfaces interface-range]

    disable-mlppp-inter-ppp-pfc

    [edit interfaces interface-range unit]

    dlci

    [edit interfaces interface-range unit]

    drop-timeout

    [edit interfaces interface-range unit]

    ds0-options and all substatements

    [edit interfaces interface-range]

    e1-options and all substatements

    [edit interfaces interface-range]

    e3-options and all substatements

    [edit interfaces interface-range]

    epd-threshold

    [edit interfaces interface-range unit]

    family mlfr-end-to-end and all substatements

    [edit interfaces interface-range unit]

    family mlfr-uni-uni and all substatements

    [edit interfaces interface-range unit]

    family mlppp and all substatements

    [edit interfaces interface-range unit]

    fragment-threshold

    [edit interfaces interface-range unit]

    ggsn-options and all substatements

    [edit interfaces interface-range]

    keepalives | no-keepalives

    [edit interfaces interface-range]
    [edit interfaces interface-range unit]

    lmi

    [edit interfaces interface-range]

    lsq-failure-options

    [edit interfaces interface-range]

    mlfr-uni-nni-bundle-options and all substatements

    [edit interfaces interface-range]

    mrru

    [edit interfaces interface-range unit]

    multicast-dlci

    [edit interfaces interface-range unit]

    multilink-max-classes

    [edit interfaces interface-range unit]

    multipoint

    [edit interfaces interface-range unit]

    multipoint-destination

    [edit interfaces interface-range unit family inet address]

    multiservice-options and all substatements

    [edit interfaces interface-range]

    oam-liveness

    [edit interfaces interface-range unit]

    oam-period

    [edit interfaces interface-range unit]

    passive-monitor-mode

    [edit interfaces interface-range unit]

    peer-unit

    [edit interfaces interface-range unit]

    plp-to-clp

    [edit interfaces interface-range unit]

    point-to-point

    [edit interfaces interface-range unit]

    ppp-options and all substatements

    [edit interfaces interface-range]
    [edit interfaces interface-range unit]

    receive-lsp

    [edit interfaces interface-range unit]

    satop-options and all substatements

    [edit interfaces interface-range]

    serial-options and all substatements

    [edit interfaces interface-range]

    service-domain

    [edit interfaces interface-range unit]

    shaping

    [edit interfaces interface-range unit]

    short-sequence

    [edit interfaces interface-range unit]

    shdsl-options and all substatements

    [edit interfaces interface-range]

    t1-options and all substatements

    [edit interfaces interface-range]

    t3-options and all substatements

    [edit interfaces interface-range]

    transmit-lsp

    [edit interfaces interface-range unit]

    transmit-weight

    [edit interfaces interface-range unit]

    trunk-id

    [edit interfaces interface-range unit]

    tunnel

    [edit interfaces interface-range unit]

    vci

    [edit interfaces interface-range unit]

    vci-range

    [edit interfaces interface-range unit]

    vpi

    [edit interfaces interface-range unit]

    Published: 2012-12-11