Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
System Requirements for a Routing Matrix with a TX Matrix Plus Router
To implement a routing matrix with a TX Matrix Plus router, your system must meet the following minimum requirements:
- Junos OS Release 9.6 or later.
- One Juniper Networks TX Matrix Plus Router.
- Two to four Juniper Networks T1600 Core Routers.
To connect a T1600 router to the routing matrix, the T1600 router must contain the following components:
- Two C1800 Routing Engines—Model RE-DUO-C1800-8G
- Two LCC-CB Control Boards (CBs)—Model CB-LCC
- Five TXP-T1600 Switch Interface Boards (SIBs)—Model SIB-TXP-T1600
- One rear fan tray—Model FAN-REAR-TXP-LCC
For information about upgrading a standalone T1600 router and integrating it into a routing matrix, see the TX Matrix Plus Router Hardware Guide
. - Physical Interface Cards (PICs) of your choice. To view
a list of supported PICs, see the T1600 Core Router PIC Guide .
