Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
sfpplus
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Description
Configure the operating mode for the specified port on the SFP+ uplink module on the EX3200 or EX4200 switch.
The remaining statement is explained separately.
Default
By default, the SFP+ uplink module operates in the 10-gigabit mode and supports SFP+ transceivers.
 | Note: The SFP+ uplink module provides two ports for 10-gigabit small form-factor pluggable (SFP+) transceivers when configured to operate in 10-gigabit mode or four ports for 1-gigabit small form-factor pluggable (SFP) transceivers when configured to operate in 1-gigabit mode. |
Required Privilege Level
interface—To view this statement in the
configuration.
interface-control—To add this
statement to the configuration.
