Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
priority1
Syntax
priority1 priority1-value;
Hierarchy Level
[edit protocols ptp]
Release Information
Statement introduced in Junos OS Release 12.2.
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access Routers.
Description
Configure the priority as one of the following:
- In the slave, the priority value is set to select the best master clock. Note that in order to select a particular master clock, the priority value in the master clock’s announce message must be equal to or lower than the configured priority1-value.
- In the master, the priority value is set to represent itself in the announce message to other slaves.
- In the boundary node, the slave uses this value to determine the best master clock, whereas the master uses this value from the announce message of the selected master clock.
Note that the lower value takes precedence.
Options
priority1-value—The priority value of the clock.
Range: 0 through 255
Default: 128
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
