Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- EX Series
- Example: Configuring an EX4200 Virtual Chassis Using a Preprovisioned Configuration File
- Example: Setting Up a Full Mesh EX8200 Virtual Chassis with Two EX8200 Switches and Redundant XRE200 External Routing Engines
- Configuring an EX4200, EX4500, or EX4550 Virtual Chassis (CLI Procedure)
- Configuring an EX8200 Virtual Chassis (CLI Procedure)
- Adding a New EX4200 Switch to an Existing EX4200 Virtual Chassis (CLI Procedure)
- Replacing a Member Switch of an EX Series Virtual Chassis Configuration (CLI Procedure)
preprovisioned
Syntax
preprovisioned;
Hierarchy Level
[edit virtual-chassis]
Release Information
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
Enable the preprovisioned configuration mode for a Virtual Chassis configuration.
When the preprovisioned configuration mode is enabled, you cannot use the CLI or the J-Web interface to change the mastership priority or member ID of member switches.
You must use this statement to configure an EX8200 Virtual Chassis. Nonprovisioned configuration of an EX8200 Virtual Chassis is not supported.
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related Documentation
- EX Series
- Example: Configuring an EX4200 Virtual Chassis Using a Preprovisioned Configuration File
- Example: Setting Up a Full Mesh EX8200 Virtual Chassis with Two EX8200 Switches and Redundant XRE200 External Routing Engines
- Configuring an EX4200, EX4500, or EX4550 Virtual Chassis (CLI Procedure)
- Configuring an EX8200 Virtual Chassis (CLI Procedure)
- Adding a New EX4200 Switch to an Existing EX4200 Virtual Chassis (CLI Procedure)
- Replacing a Member Switch of an EX Series Virtual Chassis Configuration (CLI Procedure)
