TechLibrary

Navigation

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

peak-information-rate

Syntax

peak-information-rate bits-per-second;

Hierarchy Level

[edit firewall three-color-policer policer-name two-rate]

Release Information

Statement introduced in Junos OS Release 11.1 for the QFX Series.

Description

Configure the maximum achievable rate. Packets that exceed the committed information rate (CIR) but are below the peak information rate (PIR) are marked with medium-high packet loss priority (yellow). Packets that exceed the PIR are marked with high packet loss priority (red). You can configure a discard action for packets that exceed the PIR.

Note: When you include the peak-information-rate statement in the configuration, you must also include the committed-information-rate and peak-burst-size statements at the same hierarchy level.

Options

bits-per-second—Number of bits per second. You can specify a value in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000).

Range: 32,000 bps through 10,000,000,000 bps (10 gbps)

Required Privilege Level

firewall—To view this statement in the configuration.

firewall-control—To add this statement to the configuration.