TechLibrary

Navigation

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

leaveall-timer (MVRP)

Syntax

leaveall-timer milliseconds;

Hierarchy Level

[edit logical-systems logical-system-name protocols mvrp],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols mvrp interface (all | interface-name)] (for virtual switch instance type),[edit logical-systems logical-system-name routing-instances routing-instance-name protocols mvrp] (for virtual switch instance type),[edit logical-systems logical-system-name protocols mvrp interface (all | interface-name)],[edit protocols mvrp interface (all | interface-name)],[edit routing-instances routing-instance-name protocols mvrp] (for virtual switch instance type),[edit routing-instances routing-instance-name protocols mvrp interface (all | interface-name)] (for virtual switch instance type)

Release Information

Statement introduced in Junos OS Release 10.1 for MX Series routers.

Description

For Multiple VLAN Registration Protocol (MVRP), configure the interval at which the LeaveAll state operates on the interface.

Default

10000 milliseconds

Options

milliseconds—Interval between the sending of Leave All messages. Maintain default timer settings unless there is a compelling reason to change the settings. Modifying timers to inappropriate values might cause an imbalance in the operation of MVRP.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.