Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- EX Series
- Configuring an EX Series Switch to Use Junos Pulse Access Control Service for Network Access Control (CLI Procedure)
- Configuring the EX Series Switch for Captive Portal Authentication with Junos Pulse Access Control Service (CLI Procedure)
- IC Series
- Configuring an EX Series Switch to Use Junos Pulse Access Control Service for Network Access Control (CLI Procedure)
- Configuring the EX Series Switch for Captive Portal Authentication with Junos Pulse Access Control Service (CLI Procedure)
interval (Access Control Service)
Syntax
interval seconds;
Hierarchy Level
[edit services unified-access-control]
Release Information
Statement introduced in Junos OS Release 12.2 for EX Series switches.
Description
Configure the time between continuity check messages for the switch’s connection with the Junos Pulse Access Control Service. The specified value must be less than the value specified for timeout.
Options
seconds—Time between continuity check messages, in seconds.
Range: 1 through 9999 seconds
Default: 30 seconds
Required Privilege Level
routing—To view this statement in the
configuration.
routing-control—To add this statement
to the configuration.
Related Documentation
- EX Series
- Configuring an EX Series Switch to Use Junos Pulse Access Control Service for Network Access Control (CLI Procedure)
- Configuring the EX Series Switch for Captive Portal Authentication with Junos Pulse Access Control Service (CLI Procedure)
- IC Series
- Configuring an EX Series Switch to Use Junos Pulse Access Control Service for Network Access Control (CLI Procedure)
- Configuring the EX Series Switch for Captive Portal Authentication with Junos Pulse Access Control Service (CLI Procedure)
