Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- EX Series
- Configuring SSH Service for Remote Access to the Router or Switch
- M Series
- Configuring SSH Service for Remote Access to the Router or Switch
- MX Series
- Configuring SSH Service for Remote Access to the Router or Switch
- PTX Series
- Configuring SSH Service for Remote Access to the Router or Switch
- QFX Series
- Configuring SSH Service for Remote Access to the Router or Switch
- T Series
- Configuring SSH Service for Remote Access to the Router or Switch
client-alive-interval
Syntax
client-alive-interval seconds;
Hierarchy Level
[edit system services ssh]
Release Information
Statement introduced in Junos OS Release 12.1.
Description
Configure a timeout interval in seconds, after which if no data has been received from the client, sshd will send a message through the encrypted channel to request a response from the client. This option applies to SSH protocol version 2 only. Use in conjunction with client-alive-count-max to disconnect unresponsive SSH clients.
Default
0 seconds
Options
Range: 1 through 65535
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related Documentation
- EX Series
- Configuring SSH Service for Remote Access to the Router or Switch
- M Series
- Configuring SSH Service for Remote Access to the Router or Switch
- MX Series
- Configuring SSH Service for Remote Access to the Router or Switch
- PTX Series
- Configuring SSH Service for Remote Access to the Router or Switch
- QFX Series
- Configuring SSH Service for Remote Access to the Router or Switch
- T Series
- Configuring SSH Service for Remote Access to the Router or Switch
