Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
atm-l2circuit-mode
Syntax
atm-l2circuit-mode (cell | aal5 | trunk trunk);
Hierarchy Level
[edit chassis fpc slot-number pic pic-number],[edit chassis lcc number fpc slot-number pic pic-number] (Routing
Matrix)
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Configure the ATM2 intelligent queuing (IQ) Layer 2 circuit transport mode.
Default
aal5
Options
aal5—Tunnel a stream of ATM cells encoded with ATM Adaptation Layer (AAL5) over an IP Multiprotocol Label Switching (MPLS) backbone.
cell—Tunnel a stream of ATM cells over an IP MPLS backbone.
trunk trunk—Transport ATM cells over an MPLS core network that is implemented on some other vendor switches. Trunk mode can be UNI or NNI.
 | Note: To determine which vendors support Layer 2 circuit trunk mode, contact Juniper Networks Customer Support. |
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
