show system services dhcp conflict
Syntax
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
(J Series routers only and EX Series switches) Display Dynamic Host Configuration Protocol (DHCP) client-detected conflicts for IP addresses. When a conflict is detected, the DHCP server removes the address from the address pool.
Options
This command has no options.
Required Privilege Level
view and system
List of Sample Output
show system services dhcp conflictOutput Fields
Table 1 describes the output fields for the show system services dhcp conflict command. Output fields are listed in the approximate order in which they appear.
Table 1: show system services dhcp conflict Output Fields
Field Name | Field Description |
|---|---|
Detection time | Date and time the client detected the conflict. |
Detection method | How the conflict was detected. |
Address | IP address where the conflict occurs. The addresses in the conflicts list remain excluded from the pool until you use a clear system services dhcp conflict command to manually clear the list. |
Sample Output
show system services dhcp conflict
user@host> show system services dhcp conflict Detection time Detection method Address 2004-08-03 19:04:00 PDT ARP 3.3.3.5 2004-08-04 04:23:12 PDT Ping 4.4.4.8 2004-08-05 21:06:44 PDT Client 3.3.3.10
