show redundant-power-system power-supply
Syntax
Release Information
Command introduced in Junos OS Release 12.1 for EX Series switches.
Description
Display information about the power supplies installed in the Redundant Power System (RPS). After installing a power supply, we recommend that you use this command to be sure that the power supply installed correctly.
Required Privilege Level
view
List of Sample Output
show redundant-power-system power-supply (Standalone Switch)show redundant-power-system power-supply (EX3300 Virtual Chassis)
Output Fields
Table 1 lists the output fields for the show redundant-power-system power-supply command. Output fields are listed in the approximate order in which they appear.
Table 1: show redundant-power-system power-supply Output Fields
Field Name | Field Description | Level of Output |
|---|---|---|
RPS | Serial number of the RPS. | All levels |
PSU Slot | Number of the power supply slot. Slots are numbered 1 through 3. | All levels |
Status | Status of the power supply slots:
| All levels |
Description | Description of the RPS power supply installed in the slot. | All levels |
Sample Output
show redundant-power-system power-supply (Standalone Switch)
user@switch> show redundant-power-system power-supply
Gathering requested information.
RPS-CG0209121807
PSU Slot Status Description
1 Online 930W AC
2 offline ---
3 Online 930W AC
show redundant-power-system power-supply (EX3300 Virtual Chassis)
user@switch> show redundant-power-system power-supply
Gathering requested information.
RPS-CG0209121814
PSU Slot Status Description
1 Online 930W AC
2 offline ---
3 Online 930W AC
RPS-CG0209121815
PSU Slot Status Description
1 Online 930W AC
2 Online 930W AC
3 Online 930W AC
