Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    show fabric administration inventory interconnect-devices

    Syntax

    show fabric administration inventory interconnect-devices interconnect-device-name

    Release Information

    Command introduced in Junos OS Release 11.3 for the QFX Series.

    Description

    (QFabric systems only) Display the Interconnect devices that belong to a QFabric system.

    Options

    none

    Display all Interconnect devices within a QFabric system.

    interconnect-device-name

    Display a specific Interconnect device within a QFabric system.

    Required Privilege Level

    admin

    List of Sample Output

    show fabric administration inventory interconnect-devices
    show fabric administration inventory interconnect-devices device-name

    Output Fields

    Table 1 lists the output fields for the show fabric administration inventory interconnect-devices command. Output fields are listed in the approximate order in which they appear.

    Table 1: show fabric administration inventory interconnect-devices Output Fields

    Field Name

    Field Description

    Interconnect device

    Name of the Interconnect devices associated with the partition.

    Item

    Type of QFabric system component being viewed.

    Interconnect devices either display the alias name (if configured) or the hardware serial identifier and Control Board Routing Engine numbers.

    Identifier

    Hardware serial identifier of a QFabric system component. When you configure an alias name for a component, the ID is displayed.

    Connection

    Status of a QFabric system component: either Connected or Disconnected, depending on whether or not the Director software has detected keepalive messages for the listed component.

    Configuration

    Whether or not the configuration for a QFabric system component has been received and installed. The configuration can be Configured, Failed (unsuccessful), Pending (in the process of being written or retried), or Unknown.

    Sample Output

    show fabric administration inventory interconnect-devices

    user@qfabric> show fabric administration inventory interconnect-devices
    Item                    Identifier              Connection      Configuration
    Interconnect device
      IC-YW3781                                     Connected       Configured    
        YW3781/RE0                                  Connected
        YW3781/RE1                                  Connected
      IC-YW3798                                     Connected       Configured    
        YW3798/RE0                                  Connected
        YW3798/RE1                                  Connected

    show fabric administration inventory interconnect-devices device-name

    user@qfabric> show fabric administration inventory interconnect-devices IC-YW3781
    Item                    Identifier              Connection      Configuration
    Interconnect device
      IC-YW3781                                     Connected       Configured    
        YW3781/RE0                                  Connected
        YW3781/RE1                                  Connected
       

    Published: 2012-12-19