Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- Detection and Corrective Actions of FPCs with Degraded Fabric on MX Series Routers
- Detection and Recovery of Fabric-Related Failures Caused by Traffic Black Holes on MX Series Routers
- Corrective Actions for Fabric Failures on MX Series Routers
- redundancy-mode
- Configuring Redundancy Fabric Mode for Active Control Boards on MX Series Routers
show chassis fabric redundancy-mode
Syntax
show chassis fabric redundancy-mode
Release Information
Command introduced in Junos OS Release 12.2.
Description
(MX240, MX480, and MX960 routers only) Display whether redundancy mode is configured for active control boards to enable increased fabric bandwidth usage.
Options
This command has no options.
Required Privilege Level
view
Related Documentation
- Detection and Corrective Actions of FPCs with Degraded Fabric on MX Series Routers
- Detection and Recovery of Fabric-Related Failures Caused by Traffic Black Holes on MX Series Routers
- Corrective Actions for Fabric Failures on MX Series Routers
- redundancy-mode
- Configuring Redundancy Fabric Mode for Active Control Boards on MX Series Routers
List of Sample Output
show chassis fabric redundancy-modeOutput Fields
Table 1 lists the output fields for the show chassis fabric redundancy-mode command. Output fields are listed in the approximate order in which they appear.
Table 1: show chassis fabric redundancy mode Output Fields
Field name | Field Description |
|---|---|
Fabric redundancy mode | Currently configured mode of the fabric |
Sample Output
show chassis fabric redundancy-mode
user@host> show chassis fabric redundancy-modeFabric redundancy mode: Redundant Fabric
