Navigation
request virtual-chassis renumber member-id 1 new-member-id 0
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
request virtual-chassis renumber
Syntax
request virtual-chassis renumber member-id old-member-id new-member-id new-member-id
Release Information
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Renumber a member of a Virtual Chassis configuration.
 | Note: You must run this command from the Virtual Chassis member in the master role. |
Options
member-id old-member-id | — | Specify the ID of the member that you wish to renumber. |
new-member-id new-member-id | — | Specify an unassigned member ID. |
Required Privilege Level
system-control
List of Sample Output
request virtual-chassis renumber member-id 5 new-member-id 4request virtual-chassis renumber member-id 1 new-member-id 0
Sample Output
request virtual-chassis renumber member-id 5 new-member-id 4
user@switch> request virtual-chassis renumber
member-id 5 new-member-id 4request virtual-chassis renumber member-id 1 new-member-id 0
user@external-routing-engine> request virtual-chassis
renumber member-id 1 new-member-id 0