TX Matrix Router Chassis and Interface Names
The output from some CLI commands uses the terms SCC and scc (for switch-card chassis) to refer to the TX Matrix router. Similarly the terms LCC, and lcc as a prefix (for line-card chassis) refer to a T640 router in a routing matrix.
T640 routers are assigned LCC index numbers, 0 through 3, depending on the hardware setup of the routing matrix. A routing matrix can have up to four T640 routers, and each T640 router has up to eight FPCs. Therefore, the routing matrix can have up to 32 FPCs (0 through 31). The FPCs are configured at the [edit chassis lcc number] hierarchy level.
In the Junos OS CLI, an interface name has the following format:
When you specify the FPC number, the Junos OS determines which T640 router contains the specified FPC based on the following assignment:
- On LCC 0, FPC hardware slots 0 through 7 correspond to FPC software numbers 0 through 7.
- On LCC 1, FPC hardware slots 0 through 7 correspond to FPC software numbers 8 through 15.
- On LCC 2, FPC hardware slots 0 through 7 correspond to FPC software numbers 16 through 23.
- On LCC 3, FPC hardware slots 0 through 7 correspond to FPC software numbers 24 through 31.
To convert FPC numbers in the T640 routers to the correct FPC in a routing matrix, use the conversion chart shown in Table 1. You can use the converted FPC number to configure the interfaces on the TX Matrix router in your routing matrix.
Table 1: T640 to Routing Matrix FPC Conversion Chart
FPC Numbering | T640 Routers | |||||||
|---|---|---|---|---|---|---|---|---|
| LCC 0 | |||||||
| T640 FPC Slots | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Routing Matrix FPC Slots Equivalent | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| LCC 1 | ||||||||
| T640 FPC Slots | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Routing Matrix FPC Slots Equivalent | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| LCC 2 | ||||||||
| T640 FPC Slots | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Routing Matrix FPC Slots Equivalent | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 |
| LCC 3 | ||||||||
| T640 FPC Slots | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Routing Matrix FPC Slots Equivalent | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 |
Some examples include:
- In a routing matrix that contains lcc 0 through lcc 2, so-20/0/1 refers to FPC slot 4 of lcc 2.
- If you have a Gigabit Ethernet interface installed in
FPC slot 7, PIC slot 0, port 0 of T640
router LCC 3, you can configure this interface on the TX
Matrix router by including the ge-31/0/0 statement at the [edit interfaces] hierarchy level.[edit]interfaces {ge-31/0/0 {unit 0 {family inet {address ip-address;}}}}
