Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- EX Series
- Configuring Rapid Spanning-Tree Protocol
- Configuring Multiple Spanning-Tree Protocol
- Configuring VLAN Spanning-Tree Protocol
- MX Series
- Configuring Rapid Spanning-Tree Protocol
- Configuring Multiple Spanning-Tree Protocol
- Configuring VLAN Spanning-Tree Protocol
- mode
- interface (Spanning Tree)
- SRX Series
- mode
- interface (Spanning Tree)
Spanning-Tree Instance Interface Point-to-Point Link Mode
The interface mode allows RSTP, MSTP, and VSTP to converge faster than the original STP on point-to-point links. The protocol does not need to wait for timers on point-to-point links. Configure interfaces that have a point-to-point link to another Layer 2 bridge as p2p. This parameter is ignored if the STP is configured to run the original spanning-tree version.
If the interface mode is configured at both the VSTP global and VLAN levels, the configuration at the VLAN level overrides the global configuration.
Related Documentation
- EX Series
- Configuring Rapid Spanning-Tree Protocol
- Configuring Multiple Spanning-Tree Protocol
- Configuring VLAN Spanning-Tree Protocol
- MX Series
- Configuring Rapid Spanning-Tree Protocol
- Configuring Multiple Spanning-Tree Protocol
- Configuring VLAN Spanning-Tree Protocol
- mode
- interface (Spanning Tree)
- SRX Series
- mode
- interface (Spanning Tree)
