Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Using Filters to Display Session and Flow Information for SRX Series Services Gateways
Purpose
You can display flow and session information about one or more sessions by specifying a filter as an argument to the show security flow session command. You can use the following filters: application, destination-port, destination-prefix, family, idp, interface, nat, protocol, resource-manager, session-identifier, source-port, source-prefix and tunnel. The device displays the information for each session followed by a line specifying the number of sessions reported on. Here is an example of the command using the source-prefix filter.
Action
To view information about selected sessions using filters in the CLI, enter the following command:
user@host> show security flow session source-prefix
10/8
