Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- Additional Information
- Junos OS Feature Support Reference for SRX Series and J Series Devices
Verifying an MPLS Layer 3 VPN Configuration
Purpose
Verify the connectivity of MPLS Layer 3 VPNs using the ping mpls command. This command helps to verify that a VPN has been enabled by testing the integrity of the VPN connection between the source and destination routers. The destination prefix corresponds to a prefix in the Layer 3 VPN. However, ping tests only whether the prefix is present in a PE VRF table.
Action
To a combination of a IPv4 destination prefix and a Layer 3 VPN name on the destination PE router, use the following command:
ping mpls l3vpn l3vpn-name prefix prefix count count
Related Documentation
- Additional Information
- Junos OS Feature Support Reference for SRX Series and J Series Devices
