Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- J Series
- MPLS Layer 2 Circuit Configuration Overview
- SRX Series
- MPLS Layer 2 Circuit Configuration Overview
- Additional Information
- Junos OS Feature Support Reference for SRX Series and J Series Devices
Verifying an MPLS Layer 2 Circuit Configuration
Purpose
To verify the connectivity of MPLS Layer 2 circuits, use the ping mpls command. This command helps to verify that the circuit has been enabled by testing the integrity of the Layer 2 circuit between the source and destination routers.
Action
- To ping an interface configured for the Layer 2 circuit
on the PE router, enter the following command: ping mpls l2circuit interface interface-name
- To ping a combination of the IPv4 prefix and the virtual
circuit ID on the destination PE router, enter the following command: ping mpls l2circuit virtual-circuitprefix virtual-circuit-id
Related Documentation
- J Series
- MPLS Layer 2 Circuit Configuration Overview
- SRX Series
- MPLS Layer 2 Circuit Configuration Overview
- Additional Information
- Junos OS Feature Support Reference for SRX Series and J Series Devices
