Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Check That the Process Has Restarted
Purpose
After you have entered the restart command to restart a process, make sure that the process is up and running.
Action
To check that a process has restarted, use the following Junos OS CLI operational mode command:
user@host>
show system processes extensive
Sample Output 1
user@host> show system processes extensive last pid: 750; load averages: 0.00, 0.00, 0.00 up 0+00:58:50 18:34:17 52 processes: 1 running, 51 sleeping Mem: 50M Active, 19M Inact, 38M Wired, 264K Cache, 86M Buf, 642M Free Swap: 768M Total, 768M Free PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND 546 root 10 0 9096K 1720K nanslp 0:21 0.00% 0.00% chassisd 685 root 2 0 12716K 3840K kqread 0:01 0.00% 0.00% rpd 553 root 2 0 8792K 1544K select 0:01 0.00% 0.00% mib2d 552 root 2 0 8632K 1556K select 0:01 0.00% 0.00% snmpd 63 root 2 0 9316K 1564K select 0:00 0.00% 0.00% kmd 64 root 2 0 7736K 948K select 0:00 0.00% 0.00% fud 31 root 10 0 770M 25568K mfsidl 0:00 0.00% 0.00% newfs 47 root 2 0 7732K 888K select 0:00 0.00% 0.00% alarmd 45 root 2 0 10292K 2268K select 0:00 0.00% 0.00% dcd 50 root 2 -12 1308K 692K select 0:00 0.00% 0.00% ntpd 1 root 10 0 816K 520K wait 0:00 0.00% 0.00% init 50 root 32 0 21716K 828K RUN 0:00 0.00% 0.00% top 60 root 2 0 8208K 1088K select 0:00 0.00% 0.00% rmopd 61 root 2 0 8188K 1156K select 0:00 0.00% 0.00% cosd 59 root 2 0 1632K 840K select 0:00 0.00% 0.00% ilmid
Sample Output 2
user@host> show system processes extensive last pid: 758; load averages: 0.00, 0.00, 0.00 up 0+01:01:48 18:37:15 52 processes: 1 running, 51 sleeping Mem: 51M Active, 19M Inact, 38M Wired, 156K Cache, 86M Buf, 642M Free Swap: 768M Total, 768M Free PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND 546 root 10 0 9096K 1720K nanslp 0:22 0.05% 0.05% chassisd 553 root 2 0 8792K 1544K select 0:01 0.00% 0.00% mib2d 552 root 2 0 8632K 1556K select 0:01 0.00% 0.00% snmpd 563 root 2 0 9316K 1564K select 0:00 0.00% 0.00% kmd 564 root 2 0 7736K 948K select 0:00 0.00% 0.00% fud 131 root 10 0 770M 25568K mfsidl 0:00 0.00% 0.00% newfs 547 root 2 0 7732K 888K select 0:00 0.00% 0.00% alarmd 545 root 2 0 10292K 2268K select 0:00 0.00% 0.00% dcd 1 root 10 0 816K 520K wait 0:00 0.00% 0.00% init 550 root 2 -12 1308K 692K select 0:00 0.00% 0.00% ntpd 758 root 32 0 21716K 832K RUN 0:00 0.00% 0.00% top 560 root 2 0 8208K 1088K select 0:00 0.00% 0.00% rmopd 561 root 2 0 8188K 1156K select 0:00 0.00% 0.00% cosd 559 root 2 0 1632K 840K select 0:00 0.00% 0.00% ilmid 573 lab 2 0 7480K 2580K select 0:00 0.00% 0.00% cli 751 root 2 0 12716K 3944K kqread 0:00 0.00% 0.00% rpd 558 root 2 20 8708K 1880K select 0:00 0.00% 0.00% sampled 555 root 2 0 1856K 932K select 0:00 0.00% 0.00% vrrpd 686 root 2 0 7808K 940K select 0:00 0.00% 0.00% apsd
Meaning
The sample output shows that the routing protocol process (rpd) was restarted because the process identifier (PID) of the process was renamed from 685, as shown in the Sample Output 1, to 751 as shown in Sample Output 2.
