Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- J Series
- PPPoE Overview
- M Series
- Understanding PPPoE Service Name Tables
- Configuring PPPoE Service Name Tables
- PPPoE Overview
- MX Series
- Understanding PPPoE Service Name Tables
- Configuring PPPoE Service Name Tables
- PPPoE Overview
- T Series
- PPPoE Overview
- Additional Information
- Junos OS Ethernet Interfaces Configuration Guide
Enabling Advertisement of Named Services in PADO Control Packets
You can enable advertisement of named services in PADO control packets sent by the router to the PPPoE client to indicate the services that the router can offer. By default, advertisement of named services in PADO packets is disabled. You can enable PADO advertisement as a global option on the router when you configure the PPPoE protocol.
 | Note: Make sure the combined number and length of all named services advertised in the PADO packet does not exceed the MTU size of the PPPoE underlying interface. |
To enable advertisement of named services in PADO packets:
- Configure the PPPoE protocol to enable PADO advertisement:[edit protocols pppoe]user@host# set pado-advertise
Related Documentation
- J Series
- PPPoE Overview
- M Series
- Understanding PPPoE Service Name Tables
- Configuring PPPoE Service Name Tables
- PPPoE Overview
- MX Series
- Understanding PPPoE Service Name Tables
- Configuring PPPoE Service Name Tables
- PPPoE Overview
- T Series
- PPPoE Overview
- Additional Information
- Junos OS Ethernet Interfaces Configuration Guide
