Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- J Series
- Understanding Destination NAT
- Configuring Proxy ARP (CLI Procedure)
- Example: Configuring Destination NAT for Single Address Translation
- Example: Configuring Destination NAT for IP Address and Port Translation
- Example: Configuring Destination NAT for Subnet Translation
- Verifying NAT Configuration
- SRX Series
- Understanding Destination NAT
- Configuring Proxy ARP (CLI Procedure)
- Example: Configuring Destination NAT for Single Address Translation
- Example: Configuring Destination NAT for IP Address and Port Translation
- Example: Configuring Destination NAT for Subnet Translation
- Verifying NAT Configuration
- Additional Information
- Junos OS Feature Support Reference for SRX Series and J Series Devices
Destination NAT Configuration Overview
The main configuration tasks for destination NAT are as follows:
- Configure a destination NAT address pool that aligns with your network and security requirements.
- Configure destination NAT rules that align with your network and security requirements.
- Configure NAT proxy ARP entries for IP addresses in the same subnet of the ingress interface.
Related Documentation
- J Series
- Understanding Destination NAT
- Configuring Proxy ARP (CLI Procedure)
- Example: Configuring Destination NAT for Single Address Translation
- Example: Configuring Destination NAT for IP Address and Port Translation
- Example: Configuring Destination NAT for Subnet Translation
- Verifying NAT Configuration
- SRX Series
- Understanding Destination NAT
- Configuring Proxy ARP (CLI Procedure)
- Example: Configuring Destination NAT for Single Address Translation
- Example: Configuring Destination NAT for IP Address and Port Translation
- Example: Configuring Destination NAT for Subnet Translation
- Verifying NAT Configuration
- Additional Information
- Junos OS Feature Support Reference for SRX Series and J Series Devices
