TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Configuring a Routing Policy for MPLS Layer 3 VPNs (CLI Procedure)

To configure a Layer 3 VPN routing policy on a CE router:

Configure the routing policy for the loopback interface.
[edit]user@host# edit policy-options policy-statement policy-name
Define the term for accepting packets.
[edit policy-options policy-statement policy-name]user@host# set term term-name-accept from protocol direct route-filter local-loopback-address/netmask exactuser@host# set termterm-name-accept then accept
Define the term for rejecting packets.
[edit policy-options policy-statement policy-name]user@host# set termterm-name-reject then reject
Commit the configuration if you are finished configuring the device.
[edit]user@host# commit