TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Configuring an MPLS Layer 2 Circuit (CLI Procedure)

To configure a Layer 2 circuit on a PE router:

Enable a Layer 2 circuit on the appropriate interface.
[edit] user@host# edit protocols l2circuit neighbor interface-name interface interface-name
Enter the circuit ID number.
[edit protocols l2circuit neighbor interface-name interface interface-name] user@host# set virtual-circuit-id id-number
For neighbor, specify the local loopback address, and for interface, specify the interface name of the remote PE router.
Commit the configuration if you are finished configuring the device.
[edit]user@host# commit