TechLibrary

Navigation

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

xle (Port)

Syntax

xle {(port port-number | port-range port-range-low port-range-high);}

Hierarchy Level

[edit chassis fpc slot pic pic-number]

Release Information

Statement introduced in Junos OS Release 12.2X50-D20 for the QFX Series.

Description

(QFX3500 and QFX3600 standalone switches only) Configure a specific QSFP+ port or a range of QSFP+ ports to operate as 40-Gigabit Ethernet (xle) type ports.

Caution: The Packet Forwarding Engine on the switch is restarted when you commit the port type configuration changes. As a result, you might experience packet loss on the switch.

Options

port-number

—

Port number on which you want to configure the port type. On a QFX3500 standalone switch, specify a value from 0 through 3. On a QFX3600 standalone switch, specify a value from 0 through 15.

port-range-low

—

Lowest-numbered port in the range of ports. The lowest possible value is 0.

port-range-high

—

Highest-numbered port in the range of ports. The highest possible value is 3 on QFX3500 standalone switches, and 15 on QFX3600 standalone switches.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.