xe (Port)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 12.2X50-D20 for the QFX Series.
Description
(QFX3600 standalone switch only) Configure a specific port or a range of ports to operate as four 10-Gigabit Ethernet (xe) type ports.
 | Caution: The Packet Forwarding Engine on the switch is restarted when you commit the port type configuration changes. As a result, you might experience packet loss on the switch. |
 | Note: Port Q0 supports only three (not the typical four)10-Gigabit Ethernet ports. Therefore, you can configure up to 63 (not 64) 10-Gigabit Ethernet ports on ports Q0 through Q15. |
Options
port-number | — | Port number on which you want to configure the port type. Valid values are 0 through 15. |
port-range-low | — | Lowest-numbered port in the range of ports. The lowest possible value is 0. |
port-range-high | — | Highest-numbered port in the range of ports. The highest possible value is 15. |
Required Privilege Level
routing—To view this statement in the
configuration.
routing-control—To add this statement
to the configuration.
