Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
term
Syntax
term term-name {from {application-sets set-name;applications [ application-names ];destination-address (address | any-unicast) <except>;destination-address-range low minimum-value high maximum-value <except>;destination-prefix-list list-name <except>;source-address (address | any-unicast) <except>;source-address-range low minimum-value high maximum-value <except>;}then {no-translation;translated {address-pooling paired;destination-pool nat-pool-name;destination-prefix destination-prefix;dns-alg-pool dns-alg-pool;dns-alg-prefix dns-alg-prefix;filtering-type endpoint-independent;mapping-type endpoint-independent;overload-pool overload-pool;overload-prefix overload-prefix;source-pool nat-pool-name;source-prefix source-prefix;translation-type (basic-nat44 | dynamic-nat44 | napt44 | dnat-44);}syslog;}}
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Define the NAT term properties.
 | Note: The translation types basic-nat44, dynamic-nat44, napt44, and dnat-44 are used for configuring NAT in an IPv4 network. Apart from these translation types, Junos OS also supports the translation types basic-nat-pt, basic-nat66, napt-66, napt-pt, and stateful-nat64. These translation types are used for configuring NAT in an IPv6 network. Because Junos Services Framework (JSF) does not support configuring NAT in IPv6 networks, these translation types are not displayed in the syntax above. |
Options
term-name—Identifier for the term.
Usage Guidelines
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
