TechLibrary

Navigation

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

queue-num

Syntax

queue-num queue-number;

Hierarchy Level

[edit class-of-service forwarding-classes class class-name]

Release Information

Statement introduced in Junos OS Release 11.1 for the QFX Series.

Description

Specify the queue number when you map multiple forwarding classes to queue numbers. You can map some or all of the eight unicast forwarding classes to a unicast queue (0 through 7) or some or all of the four multidestination (multicast, broadcast, destination lookup fail) forwarding classes to the same multidestination queue (8 through 11), providing that you do not map one forwarding class to more than one queue. The queue to which you map a forwarding class determines if the forwarding class is a unicast or multidestination forwarding class.

Note: If you are using Junos OS Release 12.2, use the default forwarding-class-to-queue mapping for the lossless fcoe and no-loss forwarding classes. If you explicitly configure the lossless forwarding classes, the traffic mapped to those forwarding classes is treated as lossy (best effort) traffic and does not receive lossless treatment.

Options

queue-number—Number of the CoS unicast queue (0 through 7) or the CoS multidestination queue (8 through 11).

Required Privilege Level

interfaces—To view this statement in the configuration.
interface-control—To add this statement to the configuration.