Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    clear services stateful-firewall flows

    Syntax

    clear services stateful-firewall flows <application-protocol protocol> <destination-port destination-port> <destination-prefix destination-prefix> <interface interface-name> <protocol protocol> <service-set service-set><source-port source-port> <source-prefix source-prefix>

    Release Information

    Command introduced in Junos OS Release 10.4.

    Description

    Clear stateful firewall flows.

    Options

    none
    		—

    Clear all stateful firewall flows.

    destination-port destination-port
    		—

    (Optional) Clear stateful firewall flows for a particular destination port. The range of values is 0 to 65535.

    destination-prefix destination-prefix
    		—

    (Optional) Clear stateful firewall flows for a particular destination prefix.

    interface interface-name
    		—

    (Optional) Clear stateful firewall flows for a particular interface. On M Series and T Series routers, the interface-name can be ms-fpc/pic/port or rspnumber. On J Series routers, the interface-name is ms-pim/0/port.

    protocol
    		—

    (Optional) Clear stateful firewall flows for one of the following IP types:

    • number—Numeric protocol value from 0 to 255.
    • ah—IPsec Authentication Header protocol
    • egp—An exterior gateway protocol
    • esp—IPsec Encapsulating Security Payload protocol
    • gre—A generic routing encapsulation protocol
    • icmp—Internet Control Message Protocol
    • igmp—Internet Group Management Protocol
    • ipip—IP-over-IP Encapsulation Protocol
    • ospf—Open Shortest Path First protocol
    • pim—Protocol Independent Multicast protocol
    • rsvp—Resource Reservation Protocol
    • sctp—Stream Control Protocol
    • tcp—Transmission Control Protocol
    • udp—User Datagram Protocol
    service-set service-set
    		—

    (Optional) Clear stateful firewall flows for a particular service set.

    source-port source-port
    		—

    (Optional) Clear stateful firewall flows for a particular source port. The range of values is from 0 through 65535.

    source-prefix source-prefix
    		—

    (Optional) Clear stateful firewall flows for a particular source prefix.

    Required Privilege Level

    view

     

    Related Documentation

     

    List of Sample Output

    clear services stateful-firewall flows

    Output Fields

    Table 1 lists the output fields for the clear services stateful-firewall flows command. Output fields are listed in the approximate order in which they appear.

    Table 1: clear services stateful-firewall flows Output Fields

    Field Name

    Field Description

    Interface

    Name of an adaptive services interface.

    Service set

    Name of the service set from which flows are being cleared.

    Conv removed

    Number of conversations removed.

    Sample Output

    clear services stateful-firewall flows

    user@host> clear services stateful-firewall flows 
    Interface   Service set                                             Conv removed
ms-0/3/0    svc_set_trust                                                     0
ms-0/3/0    svc_set_untrust                                                   0

    Published: 2012-07-02

    Previous Page Next Page