Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- J Series
- VPN Overview
- Example: Configuring a Hub-and-Spoke VPN
- SRX Series
- VPN Overview
- Example: Configuring a Hub-and-Spoke VPN
- Additional Information
- Junos OS Feature Support Reference for SRX Series and J Series Devices
Understanding Hub-and-Spoke VPNs
If you create two VPN tunnels that terminate at a device, you can set up a pair of routes so that the device directs traffic exiting one tunnel to the other tunnel. You also need to create a policy to permit the traffic to pass from one tunnel to the other. Such an arrangement is known as hub-and-spoke VPN. (See Figure 1.)
You can also configure multiple VPNs and route traffic between any two tunnels.
 | Note: SRX Series devices support only the route-based hub-and-spoke feature. |
Figure 1: Multiple Tunnels in a Hub-and-Spoke VPN Configuration
Related Documentation
- J Series
- VPN Overview
- Example: Configuring a Hub-and-Spoke VPN
- SRX Series
- VPN Overview
- Example: Configuring a Hub-and-Spoke VPN
- Additional Information
- Junos OS Feature Support Reference for SRX Series and J Series Devices
