Related Documentation
jnxPingResultsTable
jnxPingResultsTable, whose object identifier is {jnxPingObjects 3}, gathers ping test results on traffic on round-trip, ingress, and egress trip delays. This is useful when you want to measure the performance of your network and verify service-level agreements with your vendors.
The jnxPingResultsEntry objects are listed in Table 1.
Table 1: jnxPingsResultsEntry
Object | Object Identifier | Description |
|---|---|---|
jnxPingResultsRttUs | jnxPingResultsEntry 1 | The round-trip delays measured for the most recent successful probe during this test, in microseconds. |
jnxPingResultsSumRttUs | jnxPingResultsEntry 2 | The sum of the round-trip delays measured for all the probes during this test, in microseconds. |
jnxPingResultsMinRttUs | jnxPingResultsEntry 3 | The minimum of the round-trip delays measured for all the probes during this test, in microseconds. |
jnxPingResultsMaxRttUs | jnxPingResultsEntry 4 | The maximum of the round-trip delays measured for all the probes during this test, in microseconds. |
jnxPingResultsAvgRttUs | jnxPingResultsEntry 5 | The average of the round-trip delays measured for all the probes during this test, in microseconds. |
jnxPingResultsStdDevRttUs | jnxPingResultsEntry 6 | The standard deviation of the round-trip delays measured during this test, in microseconds. |
jnxPingResultsEgressUs | jnxPingResultsEntry 7 | The egress trip delays measured for the most recent successful probe during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsMinEgressUs | jnxPingResultsEntry 8 | The minimum of the egress trip delays measured over all probes during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsMaxEgressUs | jnxPingResultsEntry 9 | The maximum of the egress trip delays measured over all probes during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsAvgEgressUs | jnxPingResultsEntry 10 | The average of the egress trip delays measured over all probes during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsStddevEgressUs | jnxPingResultsEntry 11 | The standard deviation of the egress trip delays measured over all probes during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsIngressUs | jnxPingResultsEntry 12 | The ingress trip delays measured for the most recent successful probe during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsMinIngressUs | jnxPingResultsEntry 13 | The minimum of the ingress trip delays measured over all probes during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsMaxIngressUs | jnxPingResultsEntry 14 | The maximum of the ingress trip delays measured over all probes during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsAvgIngressUs | jnxPingResultsEntry 15 | The average of the ingress trip delays measured over all probes during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsStddevIngressUs | jnxPingResultsEntry 16 | The standard deviation of the ingress trip delays measured over all probes during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsJitterRttUs | jnxPingResultsEntry 17 | The jitter of the round-trip delays measured for all probes during this test, in microseconds. |
jnxPingResultsJitterEngressUs | jnxPingResultsEntry 18 | The jitter of the engress trip delays measured for all probes during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsJitterIngressUs | jnxPingResultsEntry 19 | The jitter of the ingress trip delays measured for all probes during this test, in microseconds. This applies only if the probe type (pingCtlType) provides one-way delay measurements. For all other probe types, their values are irrelevant and this object returns 0. |
jnxPingResultsStatus | jnxPingResultsEntry 20 | The result of the most recent probe. |
jnxPingResultsTime | jnxPingResultsEntry 21 | The date and time of the most recent probe result. |
jnxPingResultsOwnerIndex | jnxPingResultsEntry 22 | The first index. It has the same value as pingCtlOwnerIndex and is provided for applications that are unable to obtain the value of pingCtlOwnerIndex from the instance portion of the object identifiers belonging to this table. |
jnxPingResultsTestName | jnxPingResultsEntry 23 | The other index. It has the same value as pingCtlTestName and is provided for applications that are unable to obtain the value of pingCtlTestName from the instance portion of the object identifiers belonging to this table. |
