jnxJsIpSecTunnelTable
jnxJsIpSecTunnelTable, whose object ID is {jnxJsIpSecVpnPhaseTwo 1}, is the IPsec Phase 2 Tunnel Table, with objects listed in Table 1. There is one entry for each active IPsec Phase 2 tunnel. If the tunnel is terminated, then the entry is no longer available after the table has been refreshed.
This table augments jnxIpSecTunnelMonTable in IPsec Phase 2 IKE Tunnel Table.
Table 1: jnxJsIpSecTunnelTable
Object | Object ID | Description |
|---|---|---|
jnxJsIpSecTunnelEntry | jnxJsIpSecTunnelTable 1 | Each entry contains the attributes associated with an active IPsec Phase 2 tunnel. Sequence of parameters:
|
jnxJsIpSecTunPolicyName | jnxJsIpSecTunnelEntry 1 | Policy name assoicated with this tunnel if the IPsec VPN is policy-based. If the IPsec VPN is not policy-based, this attribute is not applicable. |
jnxJsIpSecVpnTunType | jnxJsIpSecTunnelEntry 2 | Attribute to indicate whether the IPsec VPN tunnel is policy-based or route-based. |
jnxJsIpSecTunCfgMonState | jnxJsIpSecTunnelEntry 3 | According to user configuration, whether to monitor the IPsec tunnel to be enabled or not:
|
jnxJsIpSecTunState | jnxJsIpSecTunnelEntry 4 | Attribute to indicate whether the IPsec tunnel is up or down, determined by ICMP ping if jnxJsIpSecTunCfgMonState is enabled:
|
