jnxIfTable
jnxIfTable lists traffic statistics, input errors, and output errors for an interface.
jnxIfEntry objects are listed in Table 1.
Table 1: jnxIfTable
Object | Object Identifier | Description |
|---|---|---|
ifIn1SecRates | ifJnxEntry 1 | The number of bits per second (bps) delivered by this sublayer to its next higher sublayer. |
ifIn1SecOctets | ifJnxEntry 2 | The number of octets per second delivered by this sublayer to its next higher sublayer. |
ifIn1SecPkts | ifJnxEntry 3 | The number of packets per second (pps) delivered by this sublayer to its next higher sublayer. |
ifOut1SecRate | ifJnxEntry 4 | The number of bps delivered by this sublayer to its next lower sublayer. |
ifOut1SecOctets | ifJnxEntry 5 | The number of octets per second delivered by this sublayer to its next lower sublayer. |
ifOut1SecPkts | ifJnxEntry 6 | The number of pps delivered by this sublayer to its next lower sublayer. |
ifHCIn1SecRate | ifJnxEntry 7 | The number of bps delivered by this sublayer to its next higher sublayer. This object is a 64-bit version of ifIn1SecRate. |
ifHCOut1SecRate | ifJnxEntry 8 | The number of bps delivered by this sublayer to its next lower sublayer. This object is a 64-bit version of ifOut1SecRate. |
ifJnxInErrors | ifJnxEntry 9 | Errors: The sum of the incoming frame aborts and FCS errors. |
ifJnxInFrameErrors | ifJnxEntry 10 | Framing Errors: The number of input packets that were misaligned. |
ifJnxInQDrops | ifJnxEntry 11 | Drops: The number of packets dropped by the input queue of the I/O Manager ASIC. |
ifJnxInRunts | ifJnxEntry 12 | Runts: Frames received that are smaller than the runt threshold. |
ifJnxInGiants | ifJnxEntry 13 | Giants: Frames received that are larger than the giant threshold. |
ifJnxInDiscards | ifJnxEntry 14 | Policed discards: Frames that the incoming packet match code discarded because they were not recognized or of interest. |
ifJnxInHslCrcErrors | ifJnxEntry 15 | HS link CRC errors: The number of CRC errors on the high-speed links between the ASICs responsible for handling the router interfaces while receiving packets. |
ifJnxInHslFifoOverFlows | ifJnxEntry 16 | HS link FIFO overflows: The number of FIFO overflows on the high-speed links between the ASICs responsible for handling the router interfaces. |
ifJnxInL3Incompletes | ifJnxEntry 17 | L3 incompletes: The number of incoming packets that fail Layer 3 sanity checks of the header. |
ifJnxInL2ChanErrors | ifJnxEntry 18 | L2 channel errors: The number of incoming packets for which the software could not find a valid logical interface. |
ifJnxInL2MismatchTimeouts | ifJnxEntry 19 | L2 mismatch timeouts: The count of malformed or short packets that cause the incoming packet handler to discard the frame as unreadable. |
ifJnxInInvalidVCs | ifJnxEntry 20 | Invalid virtual circuits (VCs): The number of cells that arrived for a nonexistent VC. |
ifJnxInFifoErrors | ifJnxEntry 21 | FIFO errors: The number of FIFO errors in the received direction as reported by the ASIC on the PIC. |
ifJnxBucketDrops | ifJnxEntry 22 | Bucket drops: Drops because traffic load exceeded the interface transmit and receive leaky bucket configuration. |
ifJnxSramErrors | ifJnxEntry 23 | SRAM errors: This counter increments when a hardware error has occurred in the SRAM on the PIC. |
ifJnxOutErrors | ifJnxEntry 24 | Errors: The sum of the outgoing frame aborts and FCS errors. |
ifJnxCollisions | ifJnxEntry 25 | Collisions: The number of output collisions detected on this interface. |
ifJnxCarrierTrans | ifJnxEntry 26 | Carrier transitions: The number of times the interface saw the carrier signal transition. |
ifJnxOutQDrops | ifJnxEntry 27 | Drops: The number of packets dropped by the output queue of the I/O Manager ASIC. |
ifJnxOutAgedErrors | ifJnxEntry 28 | Aged packets: The number of packets that remained in shared packet SDRAM for so long that the system automatically purged them. |
ifJnxOutFifoErrors | ifJnxEntry 29 | FIFO errors: The number of FIFO errors in the transmit direction as reported by the ASIC on the PIC. |
ifJnxOutHslFifoUnderFlows | ifJnxEntry 30 | HS link FIFO underflows: The number of FIFO underflows on the high-speed links between the ASICs responsible for handling the router interfaces. |
ifJnxOutHslCrcErrors | ifJnxEntry 31 | HS link CRC errors: The number of CRC errors on the high-speed links between the ASICs responsible for handling the router interfaces while transmitting packets. |
ifJnxCrcErrors | ifJnxEntry 32 | The count of the number of CRC errors that have occurred. |
ifJnxFcsErrors | ifJnxEntry 33 | The count of the number of FCS errors that have occurred. |
