Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
vrrp
Syntax
vrrp {command binary-file-path;disable; failover (alternate-media | other-routing-engine);}
Hierarchy Level
[edit system processes]
Release Information
Statement introduced in Junos OS Release 8.5.
Description
Specify the Virtual Router Redundancy Protocol (VRRP) process.
Options
- command binary-file-path—Path to the binary process.
- disable—Disable the VRRP process.
- failover—Configure the device to reboot
if the software process fails four times within 30 seconds, and specify
the software to use during the reboot.
- alternate-media—Configure the device to switch to backup media that contains a version of the system if a software process fails repeatedly.
- other-routing-engine—Instruct the secondary Routing Engine to take mastership if a software process fails. If this statement is configured for a process, and that process fails four times within 30 seconds, then the device reboots from the secondary Routing Engine.
 | Note: On SRX100, SRX110, SRX210, and SRX220 devices, you cannot configure the same VRRP group ID on different interfaces of a single device |
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
