jnxSyslogTable
The jnxSyslogTable, whose object identifier is {jnxSyslog 1}, provides information about each system log message generated by the router.
The jnxSyslogEntry, whose object identifier is {jnxSyslogTable 1}, has nine objects, which are listed in Table 1. Each entry provides information about a single system log message.
Table 1: jnxSyslogTable
Object | Object Identifier | Description |
|---|---|---|
jnxSyslogID | jnxSyslogEntry 1 | System log message identifier. This identifier is a numerical value and cannot be consecutive. This identifier is also used as the primary index in jnxSyslogAttrValTable. |
jnxSyslogEventName | jnxSyslogEntry 2 | An octet string that contains the system log event name. |
jnxSyslogTimestamp | jnxSyslogEntry 3 | Time the message was generated. This value is expressed as DateAndTime. |
jnxSyslogSeverity | jnxSyslogEntry 4 | Severity of the system log message. The severity value is equal to the value that the system log uses + 1. For example, an emergency message (severity 0 in the system log) has a severity of 1. Severity values include:
|
jnxSyslogFacility | jnxSyslogEntry 5 | Identifies the facility used to generate the log message. (See Table 2.) |
jnxSyslogProcessID | jnxSyslogEntry 6 | Process ID of the process that generated the system log message. |
jnxSyslogProcessName | jnxSyslogEntry 7 | Process that generated the system log message. |
jnxSyslogHostName | jnxSyslogEntry 8 | Hostname of the machine that generated the system log. |
jnxSyslogMessage | jnxSyslogEntry 9 | System log message that was generated. |
Table 2 lists the facilities that generate system log messages.
Table 2: Facilities That Generate System Log Messages
Index | Item | Description |
|---|---|---|
1 | kernel | Kernel messages |
2 | user | User level messages |
3 | Mail system | |
4 | daemon | System processes |
5 | auth | Authorization messages |
6 | syslog | Messages generated by the system log process (syslogd) |
7 | lpr | Line printer subsystem |
8 | news | Network news subsystem |
9 | uucp | UUCP subsystem |
10 | cron | Clock process |
11 | authPriv | Authorization messages |
12 | ftp | FTP process |
13 | ntp | NTP subsystem |
14 | security | Security subsystems (for example, firewall) |
15 | console | /dev/console output |
16 | reserved | Reserved for system use |
17 | loca10 | – |
18 | dfc | Junos names |
19 | loca12 | – |
20 | firewall | Junos names |
21 | pfe | Junos names |
22 | conflict | Junos names |
23 | change | Junos names |
24 | interact | Junos names |
